Welcome to Smart Home Application

The innovative home application is a low-cost IoT-enabled web application for:

1. Monitoring temperature and humidity.
2. Controlling a thermostat and a lighting system.
3. Simulating power consumption, a simple security system, and others.

Quick link

• link of final video
• Updates History
• Final checkpoint
• Project Home Portal
• link of video demo 1
• Checkpoint 2

Overview

• The IoT device uses two photoresistors and a humidity & temperature sensor (DHT11)
• The IoT device will transmit measurements to a web application so that users can monitor their homes. It will use a simulated clock for this project.
• The web application uses responsive design to allow users to view the application seamlessly on desktop, tablet, and mobile devices.
• The web application should have a navigation menu.
• The web application should use a responsive design to be viewable on desktops, tablets, and smartphones. The web application should have the index.html page to introduce your team and your project.
• The web application should have the reference.html page to list your third-party APIS, libraries, and code.

Updates

v2.0.1 12/09/2021

• Localhost
  • Updated localhost GUI
  • Updated loading values
• DASHBOARD
  • catch error when no device found
  • History chart
  • weakup/bedtime mode for light
• AWS
  • history model
  • history router
    • history REST API frame
  • save a history record
• Particle
  • varaible
  • thermostat
  • power consumption

v2.0.0 12/08/2021

• Particle
  • add variables of ac/door/power
  • if failed to read DHT, set value to 0
  • initialize all variables
• DASHBOARD 2.0.0
  • Read Temperature status
  • Read Humidity status
  • Read Door status
  • Thermostat widget
    • ac mode interface
    • (auto mode)/off, off/Cool/Heat
  • Smartlight widget
    • smartlight animation
    • write on/off smart light
  • Power consumption widget
  • AC/Heat widget
  • Temp/Hum History widget

v1.11 12/07/2021

• Removed local serial from AWS
• Updated README
• DASHBOARD 2.0.0
  • hidden Smart Light
  • hidden CMD Status Data Output
  • hidden Oline Communication
  • changed to information part to modules
  • changed to dynamic creation of widget
    • weather_module(); - temperature_module() - get result from third party API - updates Highest/Lowest/Current Temperature - updates Weather Icon - updates Humidity - updates City and Zip - humidity_module() - doorstatus_module()
• Server site
  • add get method for third party weather API

v1.10 11/28/2021

• Updated instruction of Webhook
• Removed local serial from Dashboard
• Added reading single variable for humidity, temperature, sensors
• Added remoting control of smart light and sensor value
• update Localhost for local serial communication
• update Readme.md
• fixed bugs

v1.09 11/27/2021

1. AWS
   • Client side web pages (do not need to support mobile devices for this checkpoint 2)
     • Your interface should provide an instruction (e.g., show information regarding event name, URL, Request type, Form fields in Advanced Settings) for the user to create the corresponding webhook
     • Door Sensor Status
     • Humidity Status
     • Temperature Status

v1.08 11/26/2021

1. Particle firmware
   • Implement your firmware for the following things
     • Get temperature and humidity using DHT 11
     • Get values from two photoresistors
     • Estimate door status
     • A user can receive data from the device where the data should contain “time”, “temperature”, “humidity”, and “door status” - [x] Minimum requirements: By clicking a button, a user can see received data
2. Local host (node.js + serialport + your web-based GUI)
   • Implement your web-based GUI and localhost server for the following things
     • Display your measurement data for
       • Temperature/Humidity from DHT 11
       • Values from two photoresistors
       • Door status
       • Smart light brightness
3. AWS
   • Client side web pages (do not need to support mobile devices for this checkpoint 2)
     • A visualization/control interface
       • A user can receive data from the device where the data should contain “time”, “temperature”, “humidity”, and “door status”
     • Server side
       • implement simulated clock for local serial

v1.07 11/25/2021

1. Particle firmware
   • Implement your firmware for the following things
     • Serial communication (i.e., localhost - device)
       • your commands and command processing
     • Cloud communication (i.e., AWS - device)
       • your commands and command processing
     • Adjust smart light brightness (i.e., manual/auto mode)
2. Local host (node.js + serialport + your web-based GUI)
   • Implement your web-based GUI and localhost server for the following things
     • Serial communication (connect/disconnect/device selection)
     • Interface to adjust brightness of smart light (i.e., manual/auto mode)
3. AWS

   • Client side web pages (do not need to support mobile devices for this checkpoint 2) - [x] A user can issue a “ping” command to check whether the registered device is online or offline - [x] A user can issue a “publish” command to receive data (i.e., enable/disable “publish” mode)

     • Server side
       • Should implement simulated clock for Online publish

v1.06 11/24/2021

• Account Creation and Management
  • account.html/js
    • A user should be able to update any of their account information, except email
      • register at least one device with their account
      • list registered devices
    • Device registration interface
      • A user should be able to add and
      • remove devices (e.g., device ID and API key) in his/her account
      • remove device from the list
      • A user should be able to have more than one device
  • Server site: Implement routers to communicate
    • device/add
    • device/delete

v1.05 11/23/2021

• Account Creation and Management
  • account.html/js
    • A user should be able to update any of their account information, except email
      • update information
      • delete account
      • User are able to change Preference panel after Login
      • clear Localstorage after register account
  • Server site: Implement routers to communicate
    • user/update
    • user/delete

v1.04 11/22/2021

• Account Creation and Management
  • Access to the web application should be controlled using token based authentication
  • User create an account by using an email as the username and a strong password
  • Client site
    • Sign-up interface
      • signup.js
    • Sign-in interface
      • login.js
    • account.html/js
      • review information
      • A user should be able to update any of their account information, except email
        • A user should be able to add their location using a zip code
  • Between AWS and clients
    • use MongoDB for sign-up/sign-in/device registration
  • Server site: Implement routers to communicate
    • user/signup
    • user/login
    • user/update
      • updatezip
• Removed unnecessary files

v1.03 11/21/2021

• Signup
  • sign.css
  • signup.html
  • signup.js
• Login.html
  • init login.js

v1.02 11/20/2021

• GitHub Pages
  • removed unnecessary files
• Static index.html
  • responsive design
    • carousel image width
  • separate navigation
  • separate carousel
• Dynamic website
  • changed engine of template from pug to swig
  • converted index.html to different parts
  • extracted website frame to templates for all pages
• Implementation of Https
  • certificated 90-day SSL, expires on Feb 19,2022
• Initial Signup page

v1.01 11/11/2021

• GitHub Pages with template
  • Changed default.html
  • index.md
  • updates.md
  • Check point 2
• Re-structure the project directories
  • AWS (Home page)
  • Localhost (Node.js + Serialport + Web-based GUI)
  • Particle (Particle firmware)
• README.md
• README.txt for submission